please wait

Page loading - please wait...

Hossein Habibi

T:
01642 342483
Job title:
Senior Lecturer in Mechanical Engineering
E:
h.habibi@tees.ac.uk
School/department:
School of Science, Engineering & Design
 
 
Research:
Science, Engineering and Design research
 
 
ORCID:
0000-0003-2772-7480

About Hossein Habibi

Hossein Habibi

Hossein Habibi
Senior Lecturer in Mechanical Engineering, School of Science, Engineering & Design
T: 01642 342483
E: h.habibi@tees.ac.uk
Research: Science, Engineering and Design research

Dr Hossein Habibi received the B.Sc. and M.Sc. degrees in Mechanical Engineering from Isfahan University of Technology and Shahid Chamran University of Ahvaz respectively. He accomplished his PhD study at University College Dublin on dynamics and control of flexible mechanical systems in 2013. Hossein then joined Brunel Innovation Centre (BIC) in TWI Company in Cambridge as a Research Fellow and the project leader of two European funded projects, mainly focused on the areas of ultrasonic guided waves and low frequency vibration. In 2016, he joined the Faculty of Engineering in the University of Nottingham as a Research Associate where he carried on his research in the field of continuum soft robotics. Since February 2018, Hossein is a Senior Lecturer at Teesside University.

Research interests

     Dr Habibi's research interests include:

  • Dynamics and vibration analysis of mechanical systems

  • Wave-based control of flexible mechanical systems

  • Mechanical design

  • Vehicle dynamics

  • Ultrasonic guided waves

Publications

            Journal:

-    Hossein Habibi, Patrick Land, Michael J. Ball, David Alatorre Troncoso, David T. Branson, “Optimal integration of pneumatic artificial muscles with vacuum-jammed surfaces to characterise a novel reconfigurable moulding system”, Journal of Manufacturing Processes 32 (2018) 241–253.

-      Hossein Habibi & William O’Connor, “Payload motion control of rotary gantry and luffing cranes using mechanical wave concepts”, Transactions of the Institute of Measurement and Control, SAGE, 2017, Vol. 39(11), pp. 1649–1662.

-      Hossein Habibi & William O’Connor, “Wave-based control of planar motion of beam-like mass-spring arrays”, Wave Motion, Elsevier, Volume 72 (2017), pp. 317-330.

-      Hossein Habibi, Graham Edwards, et al., “Modelling and empirical development of an anti/de-icing approach for wind turbine blades through superposition of different types of vibration”, Cold Regions Science and Technology, Elsevier, Volume 128, August 2016, Pages 1–12.

-     Hossein Habibi, Tat-Hean Gan, et al., “An acoustic antifouling study in sea environment for ship hulls using ultrasonic guided waves”, Journal of Marine Science and Technology, International Journal of Engineering Technologies and Management Research, Vol. 3, No. 4 (2016) 14-30.

-       Hossein Habibi, Graham Edwards, et al., “Developing a Novel Ice Protection System for Wind Turbine Blades Using Vibrations of Both Short and Long Wavelengths”, SAE Technical Paper 2015-01-2081, 2015, doi:10.4271/2015-01-2081.

-      William O'Connor & Hossein Habibi,Wave-based control of under-actuated flexible structures with strong external disturbing forces”, International Journal of Control, Taylor & Francis, Vol. 88, No. 9, 1818–1829, 2015, doi: 10.1080/00207179.2015.1018952.

-      Hossein Habibi, Liang Cheng, et al.A dual de-icing system for wind turbine blades combining high-power ultrasonic guided waves and low-frequency forced vibrations”, Renewable Energy, Elsevier, 83, 2015, 859-870; doi: 10.1016/j.renene.2015.05.025.

-      William O’Connor & Hossein Habibi, “Gantry crane control of a double-pendulum, distributed-mass load, using mechanical wave concepts”, Mech. Sci., 4, 251–261, doi:10.5194/ms-4-251-2013, 2013.

-     Hossein Habibi, K.H. Shirazi and M. Shishesaz, "Roll steer minimization of McPherson-strut suspension system using Genetic Algorithm method", Mechanism and Machine Theory, Elsevier, Volume 43 (Jan 2008). pp. 57-67.

-      Hossein Habibi & K.H. Shirazi, "Application of virtual reality in improvement and optimization of bump steering response of McPherson suspension mechanism, International Review of Mechanical Engineering (I.RE.M.E), Vol. 2, n. 1, January 2008, pp. 149-158.


Invited speaker and seminar chairman:

Hossein Habibi, Rongjie Kang, David Branson III, Actuation of large deformation continuum surfaces (LDCS) in continuum robotics, International Symposium on Soft Robotics, August 1-3, 2017, Xi'an Jiaotong University, Xi'an, China.

Conference:

-       S.A. Khalilpour, H.D. Taghirad, and H. Habibi, Wave-based Control of Suspended Cable Driven Parallel Manipulators, In proceeding of the 5th IEEE International Conference on Control, Instrumentation and Automation (ICCIA2017), 21-23 November 2017, Shiraz, Iran.


-      Hossein Habibi, David Branson III, Simulation of Actuated Continuum Surfaces Undergoing Large Deformations Using Lumped-Mass Techniques, In proceeding of IUTAM Symposium on Intelligent Multibody Systems – Dynamics, Control and Simulation, 11-14 September 2017, Sozopol, Bulgaria.


-        Hossein Habibi, A.Y.B Chong, J. Kanfoud, C. Selcuk, T.H. Gan, D. Mayhew, Simulation of an electro-mechanical ice protection system for aircraft structure based on ultrasonic guided wave”, Conference: GREENER AVIATION2016, October 2016, Brussels, Belgium.


-        Wenbo Duan, Hossein Habibi, et al., “Excitation of guided waves in finite width plates using a numerical approach”, ICNTE 2016: 18th International Conference on Nondestructive Testing and Evaluation, March 2016, Madrid, Spain.


-      Hossein Habibi, William O'Connor, “Payload motion control for various crane types using mechanical waves, In Proceedings of the International Conference on Multibody Dynamics, July 2013, Zagreb, Croatia.


-        William O’Connor, Hossein Habibi, “Slewing control of spacecraft with unsymmetrical flexible appendages & fluid sloshing, using wave-based control”, In Proceedings of the International Conference on Multibody Dynamics, July 2013, Zagreb, Croatia.


-     William O’Connor, Hossein Habibi, “Wave-Based Control of Under-Actuated Flexible Structures with Strong External Disturbing Force”, In Proceedings of the 2nd Joint International Conference on Multibody System Dynamics, May 2012, Stuttgart, Germany.


-         Hossein Habibi, Kourosh H. Shirazi and William O’Connor, “Optimization of the bump steering response of a McPherson suspension using a Genetic AlgorithmMultibody Dynamics 2011, ECCOMAS Thematic Conference, July 2011, Brussels, Belgium.


-       Hossein Habibi, William O'Connor, Wave-based control of under-actuated two-dimensional mass-spring arrays Multibody Dynamics 2011, ECCOMAS Thematic Conference, July 2011, Brussels, Belgium.


-     William O’Connor, Hossein Habibi, “Residual vibrations in wave-based control of lumped, flexible system”, Multibody Dynamics 2011, ECCOMAS Thematic Conference, July 2011, Brussels, Belgium.